此生產線主要是用于洗碗機上下碗籃的組合焊接生產，主要由6臺自動組合電阻焊機完成洗碗機碗籃從底網到側網的全流程組合焊接。較傳統焊接工藝大量節省人工，大幅提升產能及產成品率。
      底網工件輸送選用我司自主研發的三模往復輸送機構，自動夾緊、自動輸送、自動交換、自動脫模；側網工件輸送采用我司自主研發的雙模回轉輸送機構，自動旋轉、自動定位、自動脫模，一鍵完成多機聯動，完全實現流水線自動作業。

      焊后成品無需矯正，產能節拍≤30秒/件，一次通過率達到99%，復檢成品率達到99.99%。

     THIS PRODUCTION LINE IS MAINLY USED FOR THE COMBINATION WELDING OF DISHWASHER UPPER AND LOWER BASKET PRODUCTION, MAINLY BY 6 AU- TOMATIC COMBINATION RESISTANCE WELDING MACHINE DISHWASHER BASKET FROM THE BOTTOM MESH TO SIDE MESH COMBINATION WELDING PROCESS. COMPARED WITH THE TRADITIONAL WELDING PROCESS, IT SAVES A LOT OF LABOR AND GREATLY INCREASES THE PRODUCTION CAPACITY AND YIELD.

     THE BOTTOM NET WORKPIECE CONVESELECTS THE THREE-MODE RECIP- ROCATING CONVEMECHANISM WHICH OUR COMPANY INDEPENDENTLY DEVEL- OPS, AUTOMATICALLY CLAMPS, AUTOMATICALLY CONVEYS, AUTOMATICALLY EXCHANGES, AUTOMATICALLY DEMOULDS.; SIDE NET WORKPIECE CONVEYING WITH OUR INDEPENDENT RESEARCH AND DEVELOPMENT OF THE DUAL-MODE ROTARY CONVEYING MECHANISM, AUTOMATIC ROTATION, AUTOMATIC POSI- TIONING, AUTOMATIC MOLD 1 KEY TO COMPLETE MULTI-MACHINE LINKAGE, COMPLETE AUTOMATIC PIPELINE OPERATION.

     THERE IS NO NEED TO CORRECT THE FINISHED PRODUCT AFTER WELDING THE PASS RATE OF THE 30 PRODUCT REACHES 99% AND THE RE-INSPECTION YIELD REACHES 99.99%.

線體尺寸：15800x3200 x2120/焊點水平高度900MM

焊接范圍：各種規格洗碗機碗籃

設備焊接類型：鐵線、不銹鋼線

小車移動速度：0~500MM/S

系統最大氣壓：0.8MPA

系統額定工作壓力：0.5MPA

生產節拍：30S/件(不含人工放件，人工放件時間可與焊接重疊)
電源電壓:3相 AC 380V±10% 50HZ，控制箱路220V